Knowlage Base

ProHouz
PROHOUZ LEARNING CENTER

Frameless Shower Door Knowledge Base

Design, glass, hardware, installation, maintenance and troubleshooting guidance.

Knowledge Base v1.3.2  •  Updated October 1, 2026
ProHouz Website
Help / Design & planning
PROHOUZ KNOWLEDGE CENTER

Curb and saddle design

Keep the saddle level along the enclosure and pitch it slightly toward the shower. ProHouz recommends roughly 1/16 to 1/8 inch inward pitch for a typical curb. Too much pitch can reduce swing-door clearance. A solid stone saddle is preferred over mosaic or multiple small tiles.

Shower curb and fixed glass installation detail
The curb, glass line and bottom attachment should be planned together.

Why this matters

Frameless shower glass is custom fabricated and installed against finished construction. Design decisions can affect safety, water control, cleaning, appearance and long-term service. The best time to address these conditions is before glass is ordered.

What should be checked

  • Finished wall, curb, tile and stone condition
  • Glass thickness, dimensions and support
  • Exact hardware model and manufacturer limitations
  • Door swing or sliding travel and nearby obstructions
  • Showerhead direction, water volume and drainage
  • Access for installation, cleaning and future maintenance

Detailed guidance

Keep the saddle level along the enclosure and pitch it slightly toward the shower. ProHouz recommends roughly 1/16 to 1/8 inch inward pitch for a typical curb. Too much pitch can reduce swing-door clearance. A solid stone saddle is preferred over mosaic or multiple small tiles.

The complete enclosure should be considered as a system. Glass, hardware, finished construction and water direction all interact. Correcting one item after fabrication is often more difficult than resolving it during design.

Manufacturer specifications

Where CRL or FHC hardware is referenced, use the current specification and fabrication template for the exact model. Similar-looking hinges can have different glass thicknesses, width limits, weight limits, gasket requirements, clearances and permitted hinge quantities.

Common mistakes

  • Choosing a configuration only for appearance without checking daily practicality
  • Assuming all hinges have the same capacity
  • Ordering tempered glass before finished construction is ready
  • Trying to correct a water-management problem only with extra silicone or plastic
  • Ignoring cleaning access and future maintenance

When professional review is important

Professional review is especially important when a door hangs from a fixed panel, glass is unusually wide or tall, the opening is angled, walls are wavy, the shower is curbless, radiant heat is present, body sprays are used, or the enclosure requires complex drilling or notching.